Replacement Filters for Catit PIXI Fountain, 6 or 12 Pack

Replacement Filters for Catit PIXI Drinking Fountains

A pet fountain is only as good as the filter inside it. Once the old one fills with hair and grit, the water loses the fresh, clean appeal that got your pet drinking from the fountain in the first place. These replacement filters are made to fit Catit PIXI drinking fountains. Each one layers cotton mesh, activated carbon, and ion exchange resin into a single square pad, so a monthly swap keeps your pet's water cleaner and better tasting.

Three Layers Working in One Filter

Each filter treats the water in three ways as it flows through. The cotton mesh catches visible debris like hair, food bits, and dust before they circulate back into the bowl. The activated carbon section helps remove odors and impurities that can make water less appealing. The ion exchange resin softens the water, which matters most in homes with hard tap water.

Because all three layers sit in one pad, there's nothing to assemble. Rinse it, drop it in, and the fountain does the rest.

Key Features

• Catit PIXI fit: Sized for PIXI drinking fountains, so it seats properly around the pump.
• Cotton mesh layer: Traps hair and debris before they recirculate.
• Activated carbon: Helps reduce odors and impurities for better-tasting water.
• Ion exchange resin: Softens tap water as it passes through.
• 6 or 12 pack: Roughly six months or a full year of filters at one change per month.

How to Install a New Filter

1. Rinse the new filter thoroughly under running water before first use.
2. Remove the old filter and give the fountain basin a quick clean.
3. Place the new filter with the front side facing up so it sits flat around the center post.
4. Refill the fountain and turn it back on.

Replace the filter every 30 days for the best results. Pets who shed heavily may make the cotton layer look dirty sooner, so check it between changes.

Filter Details

• Compatibility: Catit PIXI drinking fountains
• Size: 8.4 x 8.4 cm (approx. 3.3 x 3.3 in)
• Center opening: 1.6 cm (approx. 0.6 in)
• Filter layers: Cotton mesh, activated carbon, ion exchange resin
• Frame material: Plastic
• Pack options: 6 filters or 12 filters
• Replacement interval: Every 30 days

Looking for more for your pet's water and mealtime setup? Browse our pet feeding and drinking essentials.

Frequently Asked Questions

Will these filters fit fountains other than the Catit PIXI?
They're made for Catit PIXI drinking fountains. If you use a different fountain, compare its filter slot with the 8.4 cm square size and 1.6 cm center opening before ordering.

Do I need to rinse the filter before using it?
Yes. Rinse each new filter thoroughly under running water before placing it in the fountain. This clears loose carbon dust so it doesn't end up in your pet's water.

How long does one pack last?
At the recommended change of once every 30 days, a 6 pack covers about six months and a 12 pack covers about a year.

Choose the 6 or 12 pack and keep a fresh filter on hand for every monthly change.